Contact Us
WUXI CITY BISHUN MACHINERY MANUFACTURING Co., Ltd
Add: Zhongdong Industrial Area, Houqiao, Xishan District, Wuxi City, Jiangsu Province, China
Contact:Xiaodong Yao
Mob: +86-13921295188
Tel: +86-510-88725588
Fax: +86-510-88725568
E-mail: sales@wxbishun.com
Website: www.bscentrifuges.com
The two-phase decanter centrifuge is relatively wide in the middle of the operation, and is very suitable for centrifugal filtration when it is operated, because the solid particles are easy to block the filter medium and the filtration resistance is too large or the fine particles are lost. The suspension is separated for a long time, but the moisture content of the sediment is high. The sedimentation centrifuge can be used for the separation of suspensions of crystallization, chemical sediments, pulverized coal, etc., dewatering of various sewage sludges, and slag clarification of animal and vegetable oils.
The two-phase decanter centrifuge has a relatively low running speed and a large rotor diameter. The centrifuge with high fluidity during operation is usually designed as a rigid shaft. The original scientific research machine is designed as a rigid shaft and its drum shaft. The shaft diameter is larger (Φ125mm), the critical speed is greater than the working speed, the distance between the drum shaft and the support bearing is large (800mm), and the large-size bearing is set, and the height of the entire rotating shaft system is also reduced accordingly, because there is no over-critical The vibration problem at the time of the rotation speed is simplified correspondingly, and the spherical support which is often required for the flexible shaft is eliminated.
The two-phase decanter centrifuge has the advantage that the operating speed is lower than its critical speed and the vibration problem without excessive critical speed can be operated over a wide speed range. The structure of the rigid shaft itself can be set with a large-sized bearing, and the bearing has a good stress state, which can improve the life of the whole machine. The disadvantage is that it is not easy to achieve full remote operation for disassembly and maintenance.
http://www.bscentrifuges.com/
Related Industry Knowledge
- The future development trend of cen...
- Centrifuge installation requirements
- Sludge dewatering machine
- Decanter centrifuge working principle
- Decanter centrifuge manufacturing e...
- Decanter centrifuge alarm causes
- Centrifuge is the preferred equipme...
- Application of Centrifuge in Tanner...
- Centrifuge in the field of high-end...
- Decanter centrifuge seal
- The working principle and viscosity...
- Operation process and operation req...
- Operation and structural requiremen...
- Heating method and display mode of ...
- Application characteristics and sep...
- Detection system and operation of f...
- Control function and concentration ...
- Diversified and concentrated functi...
- Adjustment and treatment effect of ...
- Different dewatering principles and...